How to Fix USB-C Not Working on Windows 10/11?

USB-C Not Working

Nowadays, most computers, tablets, or smart phones come with USB-C connectors rather than traditions rectangular USB Type-A plug because the former allows for greater power transfer. Some of you might be bothered by USB-C port not working after connecting it to your computer.

Luckily, this post will gather some solutions to fix USB-C monitor not detected, USB-C not working or charging for you.

Also see: USB A vs USB C: The Difference You Should Know

How to Fix USB-C Not Working on Windows 10/11?

Prechecks Before Troubleshooting

• Switch it to another USB type C port on your PC.
• Clean the port and check if there is any physical damage or debris.
• use the charger & cable included with your computer and connect your charger to the USB-C port on your Windows device.

Fix 1: Check for Unknown Device

If your Windows 10/11 that your USB flash drive is connected reports a problem with the device driver, follow these steps to check its status in Device Manager:

Step 1. Type device manager in the search bar and hit Enter.

Step 2. If you see a yellow exclamation beside your device, right-click on it to select Properties to check its status. If it displays any error code, check the error code and use it to troubleshoot USB-C not charging.

Fix 2: Reinstall or Update USB Drivers

Drivers plays an important role in the communication between your computer and hardware devices. Once the drivers are corrupted or outdated, the device you connect to your computer might not work properly. In this case, you need to update or reinstall the related drivers. Here’s how to do it:

Step 1. Right-click on the Start menu and select Device Manager.

Step 2. Expand Universal Serial Bus controllers and right-click on the option that contains USB Host Controller.

Step 3. Select Update driver > Search automatically for drivers > then follow the prompts on the screen to complete the process.

Fix 3: Run Device and Hardware Troubleshooter

When the hardware and devices such USB flash drives, printers, keyboard, and more on your computer don’t work properly, you can resort to an inbuilt tool called Device and Hardware Troubleshooter. Here’s how to do it:

Step 1. Type cmd on the search bar and right-click on Command Prompt to select Run as administrator.

Step 2. In the command menu, type the following command and hit Enter to launch Hardware and Device Troubleshooter.

msdt.exe -id DeviceDiagnostic

Step 3. Click on Next to start the scanning and troubleshooting process.

Fix 4: Disable USB Selective Suspend

Another factor that may affect your USB-C port are some power management settings such as USB Selective Suspend. This setting can deactivate a USB port when it is not in use to save more power. Sometimes, it might disable the port even when you are using it. Here’s how to disable this setting:

Step 1. Type power plan in the search bar and hit Enter.

Step 2. Click on Change advanced power settings.

Step 3. Expand USB settings > USB selective suspend settings > disable the options next to On battery and Plugged in.

Step 4. Click on Apply & OK to save the changes. After that, plug in your device and inspect if USB type C not working is gone.

Fix 5: Update Your Windows

Some users reported that USB-C not working, detecting, or charging disappear after they updating their operating system. Here’s how to do it:

Step 1. Press Win + I to open Windows Settings.

Step 2. Go to Update & Security > Windows Update > Check for updates. Then, the system will search for, download, and install available update for you.

Final Words

After following the tips and solutions in this guide, it will be much easier to cope with USB-C not detecting monitor or not working. We sincerely hope that you can benefit from our content!